2 to 1 Deutsch DTP Connector Splitter allows the connection of two accessory lights using one of our wiring harnesses. DT 2 to 1 Connector has a current rating of 15A, if your lights have a higher current requirement than 15A, we suggest you purchase our 2 Output wiring harness

The cable Length is 900mm

The extended Length is 1500mm

4 x CREE XM-L2 5700K

• Environmentally sealed and moulded Deutsch DT-2 connector with male wire tail included
• RFI and EMI suppressed circuity ensure no interference with sensitive radio equipment
• Fitted with Gore Breather Vent – Certified IP68 | Submersible to 3m
• 304 Series Stainless Steel Bracket and Fasteners

• Beam Characteristics

  Spot beam: Relentless, in fact we are still shocked every time we turn it on. Potent enough to take on the task of stealth driving light.

  Diffuse Spread: A homogeneous flood beam which is smooth almost cloudy in light distribution making it an ideal near field work-light, reverse or camp light.

  Wide Beam: The wide beam produces a deeper flood beam in comparison to diffuse, better suited to application require a longer throw flood beam.

The C4 comes in 3 variations of beam options to help you build the perfect lighting setup for the required application. Spot, flood or diffused. Each with their own field of usage whether you want to add some extra light off to the sides of the vehicle whilst driving or around the vehicle as work/camp lights. 

KEY TECHNICAL DETAILS 

• Built in LED Day-time Running Light (DRL) 
• Two High Performance Osram Emitters 
• UV Stable Automotive Grade PC Primary Lens 
• Environmentally sealed matching HB4 connector, for easy plug and play installation. 
• Pressure Equalisation Vent | Eliminates condensation
• IP67 Ingress Protection | Protected from immersion between 15 centimetres and 1 meter in depth for 10min at a time. 
• 50,000 hours Lifespan  
• 24 month Warranty 
• 6000K CCT
• Includes all required tilt adjust spring and screw
• All Alloy outer casing | The original is plastic. 
• RFI & EMI Suppression Circuitry 

STEDI - Fully Assembled Wiring kit for LED Work Lights or camp lights.

It contains everything you need to get your lights connected. Press button ON/OFF switch. The included relay is rated to 40A so you can use the one wiring kit to connect several light bars to the one wiring loom.

Featuring a total of 4.8 meters of wiring (full stretched out)

• 2.8m of cabling from Relay to Switch
• 2.0m of cabling from light connectors to Relay
• 12vDC 30A Rated Fuse Kit
• 12vDC 60A Switching Relay
• ON/OFF Switch
• UV Rated Insulation

QUAD Pro LED Driving Lights

The compact housing design offers endless possibilities in terms of mounting locations.  We think these are going to be hugely popular as roof-mounted arrays and on bull bars with minimal clearance like the AFN bars.

KEY FEATURES

• Includes our legendary Easy-Fit plug and play high beam wiring harness
• IP68 Ingress protection means our QUADS are 100% immersible in water and dust-tight.
• 5700K Colour temperature provides just the right amount of warmth to cut-through air-born particles.
• Environmentally sealed Deutsch DT-2 connectors
• RFI and EMI suppressed circuit design, means no interference with radio or communications equipment.
• High-Pressure Die-Cast Bracket
• Spread and Spot beam reflectors built-in. 

Key Features

• Blue LED Back Lighting 
• Upper Light is Active when Power is ON
• Lower Light is Active when Dash Lights are ON
• Laser Etched print ensure our print will never rub off with use
• Rated at 3A on 12v 
• Excellent OEM matching design
• USB Volt Meter Output Current: 2.5a+

Short Type Push Switch To Suit Toyota

KEY FEATURES

• Blue LED Back Lighting
• Upper Light is Active when Power is ON
• Lower Light is Active when Dash Lights are ON
• Laser Etched print ensure our print will never rub off with use
• Rated at 3A on 12v
• Excellent OEM matching design
• Short Type USB Volt Meter - Output Current: 2.5a+Short Type Dual USB - Output Current: 2.5a+

For almost a decade, the name STEDI has stood for cutting-edge design and market-leading performance. STEDI has continued to keep at the forefront of LED lighting, making STEDI the leading brand born right here in Australia. Unquestionably, ST3301 PRO sits at the pinnacle of the STEDI offering. A pure expression of capability and design that converges with brutal performance, making the all-new ST3301 PRO a quintessential component for any LED aficionado

STEDI multi-function, multi-colour RGB Rock Lights comes included with a full wiring harness and a Bluetooth wireless controller. Simply download our free Android or App Store app, which will allow you to choose between 5 primary colours as well as infinite shade variations.  The Bluetooth app allows you to customise brightness, colours or flash function. 

APPLICATION 

• Engine Bay Lights 
• Rock Crawling Light 
• Reverse Assist Lights 
• On Deck or Side Rail Lights for Marine
• Rear Cargo or Canopy Lights 

KEY TECHNICAL DETAILS 

• Abrasion Resistant Lens and Finish 
• IP69K Standard (Bluetooth module rated to IP64 - Splash Proof. We recommend fitment away from the elements)
• Environmentally sealed automotive connectors
• 6 to 1 Connector Included 
• High-Performance Philips LEDs 
• 50,000 hours Lifespan  
• 2 Year Warranty 
• Rubber Mounting Base 
• The cable can exit from rear or side.
• Rock light Cable Length 2 @ 5m Each Rock Light 4 @ 3.5m Length 
• Note that switching and colour changing will affect all lights, the module does not support control of individual lights.

Suitable for the updated range (new shape) of STEDI Surface 6 LED RGB Rock Lights allowing mounting with a fixed 30°.

Tall Type Push Switches to Suit Toyota

KEY FEATURES:

• Blue LED Back Lighting
• Upper Light is Active when Power is ON
• Lower Light is Active when Dash Lights are ON
• Laser Etched print ensure our print will never rub off with use
• Rated at 3A on 12v
• Excellent OEM matching design